Products

Adjustable DC Bench Power Supply Buying Guide: 30V / 60V / 120V for Electronics Repair

Choosing a bench power supply is mostly about matching the voltage range to the work you do, and this adjustable DC unit offers three common tiers: 30V, 60V and 120V. For most low-voltage electronics - laptops, phones, single-board computers, LED drivers and general circuit testing - a 30V rail covers the vast majority of jobs, while 60V suits higher-voltage boards and 120V is aimed at specialized work. Because the voltage is fully adjustable and the current can be preset, you can dial in a safe limit before connecting a device: if the circuit pulls more than expected, the supply clamps instead of letting it burn out, which is exactly what you want when fault-finding a board. A physical ON/OFF switch lets you cut output without unplugging, handy when swapping test leads at the bench. It is a switching (SMPS) design, so it stays relatively light and efficient for a workshop supply, and it suits electronics repair, hobby projects, battery charging and lab experiments.

Daranener NEO300L Portable Power Station Review: 288Wh LiFePO4, 350W for Camping and RV

If you are shopping for a compact power station for weekend camping, van life or a home blackout kit, the Daranener NEO300L is worth a close look. It stores 288Wh in a LiFePO4 battery - a chemistry known for a long cycle life and better heat tolerance than older lithium packs - and delivers a 350W continuous AC output with 600W surge. In practice that comfortably runs phones, laptops, a drone, LED lamps, a small fan or a 12V fridge, though not high-draw appliances such as a kettle or hair dryer. There are 7 ports in total: PD 60W USB-C fast charging, 120W car socket and 100W solar input, so it refills to 80% in about two hours from the mains. A digital display shows the remaining charge and output, and there is an LED SOS light for emergencies. For a first power station it hits a sensible balance of capacity, weight and price.

VAKERR X15 Pro Cordless Vacuum Review Guide: 750W 75KPA, 80-Minute Runtime for Pet Hair and Carpet

The VAKERR X15 Pro targets the two jobs cordless vacuums struggle with most: pet hair and carpet. A 750W motor provides up to 75KPA suction, and the claimed 80-minute runtime is enough to do a whole floor without stopping to recharge. Because it is a stick vacuum, it also doubles as a handheld for stairs, car seats and corners once you fit the right tool. For pet owners the combination of strong suction and long runtime is the main draw: you can go over sofas and carpet thoroughly in one go. Keep in mind that the longest runtime comes at lower power, and a full bin of pet hair will fill quickly, so empty it often.

M9/Y9 Cordless Vacuum Review Guide: 850W 80KPA Suction, 90-Minute Runtime, Smart Display

If you are choosing between cordless vacuums, the two numbers that matter most are suction and runtime, and this M9/Y9 states both clearly: an 850W motor with up to 80KPA suction and up to 90 minutes on a removable 6x4000mAh battery. The removable battery is the practical part - when it eventually wears down you can swap it instead of replacing the whole vacuum, and you can keep a spare charged for large homes. A smart display shows remaining power and mode, which helps you judge whether you have enough charge to finish. It suits pet owners, carpet and hard-floor cleaning and everyday tidy-ups. Expect maximum runtime at lower power; turbo modes drain the battery faster.

ALLPOWERS VOLIX P300 256Wh Solar Generator with SE100 100W Panel Guide: Camping, RV and Emergency Power

Buying a portable power station and a solar panel separately is fiddly, so this ALLPOWERS kit pairs a 256Wh VOLIX P300 with a 100W monocrystalline SE100 panel. The station handles phones, laptops, cameras, lights and small 12V devices, and the panel lets you recharge away from a socket on longer camping or van trips; the foldable monocrystalline design is chosen for decent output in real sunlight. It also works as a compact emergency kit at home for routers, lights and phone charging during outages. As with any small station, plan around its capacity and wattage rather than expecting to run large appliances, and remember solar charging depends on weather.

POWMr 24V 4000W Solar Inverter Guide: 140A MPPT, 110V AC, LCD and Lithium BMS Support

The POWMr 4000W inverter is a good fit if your system is built around a 24V battery bank and you want everything in one box. It turns 24V DC into 110V AC, includes a 140A MPPT solar charger, and supports lithium BMS communication, so the inverter can talk to a smart lithium battery instead of guessing its state of charge. The LCD makes setup and day-to-day checking straightforward. It is used in homes, cabins and RVs, and for backup where a modest array plus a 24V battery is enough. Before ordering, confirm the 24V bank, keep PV within the MPPT rating, and add up motor start-up surges.

DATOUBOSS 48V 5500W Solar Hybrid Inverter Guide: 8500W PV, Pure Sine Wave MPPT, RS485/RS232

The DATOUBOSS 5500W hybrid inverter is for people running serious off-grid loads on a 48V battery bank. It converts 48V DC to 110-120V AC and accepts up to 8500W of solar PV through a built-in MPPT, so you can connect a fairly large array without a separate charge controller. RS485 and RS232 ports let you monitor and integrate the system, and the pure sine wave output is safe for electronics, motors and pumps. It fits off-grid cabins, workshops and backup systems where reliability matters. Before buying, confirm your battery is 48V, your array stays within the 8500W PV limit, and the 5500W continuous rating covers your simultaneous loads.

U'King 4-Pack RGBWA+UV LED Par Lights Review Guide: 6x18W, DMX, Rechargeable Wireless Uplights

If you are lighting a wedding, party, small stage or bar, wireless uplights save hours of cabling, and this U'King 4-pack is a practical starting set. Each par uses six 18W LEDs with RGBWA plus UV, so you get rich colour mixing and a blacklight effect for glow-in-the-dark decor. They are rechargeable, which means no power runs across the floor, and DMX control lets you sync them or set them from a desk. Common uses are wall washing, event uplighting, DJ booths and photo backdrops. Check your venue size and desired throw distance, and note that battery runtime depends on brightness and colour mix.

SUMRY 4000W Hybrid Solar Inverter Guide: 24V Battery, 140A MPPT, 5600W Charger, Pure Sine Wave

The SUMRY 4000W hybrid inverter is aimed at mixed setups where you still have mains power but want solar and battery to take over. It runs on a 24V battery bank, charges from solar through a 140A MPPT controller rated to 5600W, and can also charge the battery from the grid, so you can keep the battery topped up on cloudy days. Pure sine wave output means fridges, pumps and power tools start and run normally. It suits cabins, small shops, RVs and homes that want lower bills plus backup. Match it to a 24V battery, keep the PV array under 5600W, and plan for the surge of any motor-driven load.

SUMRY 4KW/6KW 120V Off-Grid Solar Inverter Guide: 24V Battery, 140A MPPT, 5600W PV, LCD

This SUMRY off-grid inverter comes in 4KW and 6KW versions, both at 120V and both designed for a 24V battery bank, with an integrated 140A MPPT controller for up to 5600W of solar PV and an LCD for system status. The dual rating is useful because you can size the inverter to your real peak load: 4KW for a cabin or small backup, 6KW if you also want to run well pumps, fridges or tools at the same time. Pure sine wave output keeps motors and sensitive electronics happy. Before ordering, check your battery voltage (24V), confirm the PV array stays within 5600W, and add up the starting surge of any motor-driven appliances.

ANENJI 11KW 48V Hybrid Solar Inverter Guide: 160A MPPT, 500V PV, On/Off-Grid, Wi-Fi Monitor

For a whole-home or small-business solar setup, the ANENJI 11KW hybrid inverter is the higher-capacity option: it works with 48V battery banks, charges from solar through a 160A MPPT controller and accepts PV strings up to 500V, which lets you run longer series strings and save on cable. It can operate on-grid, off-grid or switch between them, so you can keep the grid as backup while solar and battery carry the load, and Wi-Fi monitoring lets you check production and battery state from a phone. Typical installs are houses with heavy loads such as pumps, air conditioners and workshops. Confirm your loads, 48V battery and PV voltage before ordering.

SUMRY 4KW 120V Off-Grid Solar Inverter Guide: 24V Battery, 140A MPPT, 5600W PV, 6.25-inch LCD

Choosing an off-grid inverter is confusing because the numbers must match your battery bank and panels. This SUMRY unit is rated 4KW at 120V and is built for a 24V battery bank, with an integrated 140A MPPT charge controller that accepts up to 5600W of solar PV. The 6.25-inch LCD shows input, output and battery status, and the pure sine wave output can run household appliances, pumps and power tools that a modified-sine unit would struggle with. Typical uses are cabins, workshops, RVs and backup systems where there is no reliable grid. Check that your battery is 24V and your panel array stays under the 5600W PV limit before buying.

ECOFLOW DELTA 3 Portable Power Station, 1024Wh LiFePO4, 1800W AC - Camping, RV and Home Backup Guide

If you keep asking how many watts a camping fridge or a laptop needs, the ECOFLOW DELTA 3 is a useful reference point: a 1024Wh LiFePO4 battery with up to 1800W AC output. In practice that covers phones, laptops, lights, routers and cameras for a weekend trip, works for van or RV living, and gives short-term home backup when the power drops. LiFePO4 is chosen for its long cycle life, and the unit recharges reasonably fast from a wall socket for its size, so topping up between trips is easy. Choose it if you want a long-life battery with real AC power rather than a small phone-only bank.

Buyer Beware: Inflatable Mummy Costume Adult Mascot Suit for Halloween, Parade, Christmas & Parties – No Battery or Charger Included

A fun inflatable mummy mascot costume for adult Halloween, parade, birthday, Christmas and party use. Before buying, confirm height fit and note that battery and charger are NOT included; you must prepare a compatible power bank/battery pack for the fan. Great for photos and short events, but not ideal for long walks, hot venues, narrow spaces, or users needing clear vision and free hands.

2‑Pack Cute Baby Inflatable Costume for Adult, Blue & Pink Pacifier Baby Blow‑up Suits for Carnival Party Fancy Dress Cosplay

ZOETOPKID Inflatable Frog Cosplay Costume Funny Blow Up Frog Costume with Air Pump Frogs Onesie Jumpsuit Halloween Costumes

Viking Costume Accessories Set Medieval Retro Steampunk PU Leather Props Halloween Cosplay LARP Renaissance Party Role Play

Medieval Chain Belt, Viking Costume Accessory, Renaissance Waist Chain, Fantasy LARP/Halloween Gear